| If
you can't find the answer to your
question here, feel free to email
it to us.. |
|
| Q:
Do any of the KTS saddles work with
a TonePros wraparound (AVT-II) bridge? |
| @ |
| A:
Unfortunately, we do not have the
saddles which will fit the AVT-II
to perfection. We have installed our
PR-05 saddles on the AVT-II bridge,
but we have needed to grind down our
saddles in order to adjust to the
spec of AVT-II bridge. We can't assure
that our saddles will work with the
TonePros AVT-II bridge at this moment.
|
|
|
Q:
Can you please tell me which Ti
saddles will fit my American Gibson
Les Paul Standard. It is a normal
2003 model with the Tune-O-Matic
bridge?
|
|
|
A:
There are two kind of Gibson bridges.
One is the Vintage ABR-1, and the
other is the Nashville. Please refer
to the photos and check your bridge.
If your bridge is ABR-1, our PR-02
will fit it. If your bridge is Nashville,
our PR-06
will fit it.
|
|
|
Q:
Can you tell me which type of your
Strat saddles I would need to replace
the ones on my Eric Clapton Strat?
(American Vintage Synchronized Tremolo)
|
|
|
|
A:
Our "PR-11" will fit your
Clapton Strat.
|
|
Q:
which of the Titanium saddles will
fit an Epiphone Sheraton II bridge?
(photo 1,
2)
|
|
|
|
A:
We are sure the bridge in the
photos were made in Korea. There
are several factories that make
TOM bridge for Epiphne in Korea
. It is difficult to say with any
certainty which of our saddles will
fit the Epiphone bridge. But we
have installed our PR-01 on the
Korean made Epiphone bridge in which
we could see the stamp of "BG-BR"
on the back side. Please look at
the back side of his bridge to see
if there is "BG-BR" stamp.
If so, the PR-01 is the one you
need.
|
|
|
Q:
I recently purchased the Saddle
pieces for a GOTOH Tune o matic
bridge. The guitar is a Peavey Firenza.
My technician says the screws from
the Peavey will not thread, because
they are too large for the holes
in your saddle pieces. Do you make
screws for this part ?
|
|
|
|
|
