Where can I buy KTS Titanium products? You can buy from one of our dealers or directly from KTS though our webshop (below) with your paypal account.

Download our products list pdf >>> or suitability chart >>>

All KTS parts are shipped via EMS from KTS headquarters in Tokyo.(Shipping Charge: $12.00 USD)

Titanium Bridge Saddles & Pieces
Tune-O-Matic Style Saddles Strat® Style Saddles
Telecaster® Style Saddles Jazz Bass® Style Saddles
Mustang®, Jaguar®, Jazz Master® Insert Block for FRT
Complete Bridge Sets
T-O-M Bridge w/Titanium Saddles Jazz Bass® Style Bridge

Telecaster ®-Style Saddles
PR-08 3 pcs. Tele Barrel Saddle

Two-string per saddle model for the Telecaster® manufactured by Fender Japan®. Strings pitch is 10.8m/m. It can be attached to the USA manufactured Telecaster® as well. A slight string groove has been manufactured directly on the saddle. The screw is mm scale made of stainless steel.

SPECIFICATIONS:
3 pieces
Thread: M3 x 0.50
String notching: YES
Length: .803 in.
Diameter: .315 in.

Price: $90.00


PR-08 quattro '68style Telecaster® 1/4h diameter saddles
Expand an image.

Saddles from late 1954 were the plain steel barrel type with no grooves. They were .250h in diameter. After mid 1958 the plain steel saddles were replaced by the .250h diameter threaded saddles that remained a standard part until sometime in 1968.In 1968 the .250h diameter steel saddles with the groove at each end were introduced. The groove took the diameter of the saddle down to between .215h to .220h at the bottom of the groove where the string is positioned.

SPECIFICATIONS:
3 pieces
Thread: 6/32
Length: .819 in.
Diameter: .250 in.

Price: $90.00


PR-08WD Compensated version
Expand an image.

Facing in the string direction, the saddle adjusts obliquely to improve the octave tuning function which has previously been the drawback with the standard two-strings-per saddle model saddles. Stability improves for high position chords as well. It can be attached to the US model Telecaster® which uses this type of saddle.

SPECIFICATIONS:
3 pieces
Thread: 6/32 Thread
String notching: NO
Length: .803 in.
Diameter: .315 in.

Price: $115.00


PR-16 6 piece Tele style saddles
Expand an image.

It is possible to install these saddles in a Tele-6 way vintage type bridge. It corresponds to not only USA but also Japanese models.

SPECIFICATIONS:
6 pieces
Thread: 4/40
Thread String notching: Yes
Diameter: .250 in.

Price: $160.00 Out of Stock


Stratocaster® - Synchronized Tremolo
PR-04 Synchronized Tremolo Bridge Saddles

This press-saddle is designed to mach the Japanese synchronized tremolo bridges made by Gotoh® and others. The string pitch is 10.8m/m .

SPECIFICATIONS:
6 pcs.
Thread Metric M3 x 0.50
Length= .827in Width= .425in
Height= .197in
E to E Spacing = 2.125in

PR-04 spec pdf >>>

Price: $115.00


PR-11 Synchronized Tremolo Bridge (USA Style)
Expand an image.

Designed to match Stratocasters® made in USA and Mexico. The screw pich follows "Inch" standard.

SPECIFICATIONS:
6 pcs.
4/40 thread Width= .445in
Length= .827in
Height= .217in
E to E Spacing = 2.225in

PR-11 spec pdf >>>

Price: $115.00


PR-14 Synchronized Tremolo Bridge (Narrow Width)
Expand an image.

This narrower pitch (.413in) saddle is compatible with PRS and most of guitars made in Asia.

SPECIFICATIONS:
6pcs.
M3 x 0.5
thread Width= .413in
Length= .827in
Height= .217in
E to E Spacing = 2.065in

PR-14 spec pdf >>>

Price: $115.00


PR-15 Synchronized Tremolo Bridge (Offset Style)
Expand an image.

This offset type saddle can be used for US made Standard Stratocasters® and Strat® Plus.

SPECIFICATIONS:
6pcs.
4/40thread Width= .413in
Length= .827in
Height= .217in
E to E Spacing = 2.065in

PR-15 spec pdf >>>

Price: $115.00 Out of Stock


PR-18 Block Type Titanium Saddles

Introducing our new block style saddles PR-18 which have 10.8mm pitch to fit Gotoh 510, GE1088,1089 etc. The new PR-18 can be installed perfectly on 10.8mm pitch (2.125" E to E spacing) bridge without any gap between the saddles.

Price: $195.00 Out of Stock


PR-17 Block Type Titanium Saddles
PR-17

This block type titanium saddle can be used on most Strat type guitar bridges including the current American Standard, PRS, Gotoh GTC101 and many others. Download the press release here >>>

SPECIFICATIONS:
6pcs.
Material: Titanium Grade-2
Width: 10.5mm (.413")
Height: 4.5mm(.177")
Length: 19.0mm(.748")
E to E spacing: 52.5mm(2.067")

Price: $195.00


PR-Mu 6piece Mustang, Jaguar, Jazz Master style saddles

There are no height screws in the saddles and each saddle is a different diameter so that they sit at different heights to compensate for the fingerboard radius. The Fender original Mustang saddles are assembled into the bridge loosely. Our "PR-Mu " saddles will fit the bridge perfectly and you won't see any gaps between the saddles. They will be more stable and the strings won't shift by hard picking. Better yet, you can get more deep midrange and longer sustain due to the character of the titanium material.

SPECIFICATIONS:
6pcs.
8.3mm (1st. 6th)
9.5mm ( 2nd. 5th)
10.5mm (3rd. 4th)
Thread = M3
E to E Spacing = 55mm

Price: $160.00


Gibson ® - Tune-O-Matic style
PR-01 Japanese ABR-1 style Tune-O-Matic Bridge
Expand an image.

Can be used with the OLD TUNE-O-MATIC style bridge that is made by gTOKIWAh (You can see the stamped character "JAPAN" on the underside of the bridge). String groove is pre-filed on center of the saddle.

SPECIFICATIONS: Thread M3 x 0.50 Width=8.8m/m
Height=6.5m/m Thickness=3.0m/m

PR-01 spec pdf >>>

Price: $65.00


PR-02 Vintage ABR-1 Tune-O-Matic Bridge
Expand an image.

Designed to match Gibson®'s original bridge, gBR-010h. As with the original parts, the string groove is not filed. After applying saddle to bridge base, trim it to match strings pitch. You can use regular file for trimming but we recommend using a diamond file.

SPECIFICATIONS: 4/40 thread
Width=8.8m/m
Height=6.5m/m
Thickness=3.0m/m

PR-02 spec pdf >>>

Price: $65.00


PR-05 Gotoh ® Tune-O-Matic Bridge
Expand an image.

Designed to match GE-103B, GE-103BT which is made by GOTOH® (Japanese parts manufacturer) Gotoh bridges are often used as replacement parts for relatively expensive models made by guitar manufacturers. String groove is pre-filed on center of the saddle.

SPECIFICATIONS: M2.6 x 0.45 thread
Width=8.8m/m
Height=8.0m/m
Thickness=3.0m/m

PR-05 spec pdf >>>

Price: $65.00


PR-06 Gibson ® Nashville Style T-O-M Bridge
Expand an image.

Designed to match Gibson®fs original bridge: gBR-030h. As with the original parts, it has not been manufactured with a string groove. After applying saddle to bridge base, trim it to match strings pitch. You can use regular file for trimming but we recommend using a diamond file.

SPECIFICATIONS: M3 x 0.5 thread
Width=8.8m/m
Height=10.0m/m
Thickness=2.55m/m

PR-06 spec pdf >>>

Price: $65.00


PR-01set Vintage ABR-1 Style Bridge Set

Expand an image.

PR-01 titanium saddles are pre- assembled with zinc die cast base. This bridge base is not Gibson®'s original parts. But it can be used as a replacement for the original Vintage ABR-1 Bridge. Also you can use this bridge on some of other manufacturer's guitar which has a Tune-O-Matic Bridge. Please refer to the drawing (click on photo), and check the size of your bridge.

Price: $92.00 (Nickel)

Price: $115.00 (Gold)


PR-06 set Nashville Style Bridge Set

Expand an image.

PR-06 titanium saddles are pre-assembled with zinc die cast base. This bridge base is not Gibson®'s original parts. But it can be used as a replacement for the original Nashville Tune-O-Matic Bridge. Also you can use this bridge on some of other manufacturer's guitar which has a Tune-O-Matic Bridge. Please refer to the drawing (cilck on photo), and check the size of your bridge. Chrome and Nickel plated bridge bases are also available, but the saddles are not plated.

Price: $125.00 (Gold)
Out of Stock

Price: $110.00 (Nickel)
Out of Stock

Price: $110.00 (Chrome)


PR-01 EP set Bridge Set

PR-01 EP titanium saddles are pre-assembled on a zinc die cast base. Epiphone bridges are manufactured by several different factories in several Asian countries, so there are some spec variations for many models. Therefore we decided to prepare the bridge (pre-installed Titanium saddles on Korean made Epiphany bridge) which will fit on any Epiphone guitars.

Please refer to the drawing (click on photo), and check the size of your bridge.

Price: $92.00 (Chrome)

Price: $115.00 (Gold)


  £@Products TOP

Titanium Bridge Saddles for Bass
PR-03 Fender ® Jazz Bass ®/Precision Bass ®
Expand an image.

It is applicable so-called Fender® Vintage Style Bass Bridge. The specification is followed to the original parts for Fender Japan.®

SPECIFICATIONS:
4 pieces
Thread: M3 x 0.5 Thread
Length: . in. (19.0m/m)
Diameter: .315 in. (8.0m/m)

Price: $115.00 Out of Stock


PR-03SP Fender Jazz Bass® Threaded Saddles
Expand an image.

Based on the design of the FENDER JAZZ BASS® style saddles and thread type. Height adjustment screws and octave adjustment screws are stainless steel.

Price: $115.00


PR-03SPWB1 Fender Jazz Bass®/Precision Bass® Style Bridge
Expand an image.

"PR-03" titanium bass saddles are pre-assembled with titanium mounting plate. Designed to replace standard J-Bass® bridges. Also adaptable for "Fender Vintage Style" and Precision Bass® bridges.

Price: $145.00


Insert Block for FRT Style Bridge



Have you ever experienced that the block had crushed in the saddle of Floyd Rose® style bridge? This is pure Titanium insert block for Floyd Rose® style locking tremolo bridges. The feature of "Titanium" prevents breakages inside of saddle usually occurring due to overly tightened screws or corrosion. The size specifications match Floyd Rose® original parts. Please note this block is not usable for the other Floyd Rose® styles such as Lo Pro Edge of Ibanez®. For specs, please check this PDF >>

Price: $38.00

Titanium Neck Plates

Titanium Neckplates. For the guitarist with everything, the highest quality neckplate available today.

Price: $75.00

Titanium Tremolo Arm

Our vintage style Ti tremolo arm is made of titanium 6AL-4V Alloy. Its weight and strength will improve your playability and you wn't have to worry as much about breaking it off in the block. US thread and Metric thread are both available.

Price: $48.00 Out of Stock

Titanium Trem Blocks

\b

Titanium Trem Blocks. Will fit your Fender, Fender Japan, Gotoh GE101T and GE101TS. Much lighter for more vibration. Only 5 available.

Price: $310.00 Out of Stock

@

@